• Address: Bend, OR 97708 (map)
• Date Posted: 09/29/09

Hartke 4.5 XL - 4x10 with HF Driver XL USA Series Bass Cabinet. H.S. 4.5XL.
This is the Original USA made series prior to the current imports.
Very rare. Serial number is 2311.
Great condition, sounds beautiful, fully functional with very little use. I used this together with my USA 410XL to create a wall of sound without abusing the speakers.
I am the original owner, purchased from an authorized dealer and used in my non-smoking home. It has sat unused for a several years. I am selling this because I just have too many toys and have to thin the herd.
There is a small dent on the front edge which does not show in the pictures and 3 dents in the back edges. I installed and have since removed a volume control for the high frequency driver. I used silicone glue to seal the little ¼” hole in the connector housing. Some of the carpet seams are starting to show, but not peeling off.
Current Import model retails for $669.99 and sale price is $499.00.
This cabinet has a retail price of about $1,100.00!
Buy it now for $225.00! No trades. Cash only. Buyer must pick up in Bend, OR.
Information from Hartke:
4.5 XL - 4x10 with HF Driver XL Series Cabinet
Professionals choose the XL Series because of its carefully calibrated and tuned cabinet design and high quality aluminum-cone drivers. XLs produce a smooth response along with the clear, punchy attack that changed the sound of bass. Each cabinet is built tough with a shockproof metal grill, reinforced corners, recessed carry handles and a rugged covering.
Maximum impact. Four Hartke 10" drivers and a custom 5" high-frequency speaker in a tuned, ported cabinet. Handles up to 275 watts at 8 ohms. Wide frequency response of 30 Hz to 12 kHz for more coverage. Ultimate Hartke.

"Expanded-Design" Tuned, Ported Cabinet
Custom Hartke 5" Aluminum-Cone High-Frequency Driver
Four Hartke XL 10" Aluminum-Cone Bass Drivers
Power Handling: 275 Watts @ 8 Ohms
Frequency Response: 30 Hz To 12 kHz
Sensitivity: 99 dB @ 1 W/1 M
Voice Coil: 1.5"
Parallel 1/4" Inputs
Dimensions: approximately 27"(H) X 24"(W) X 18"(D)
Weight: My scale says it weighs 96 lbs.

Here is a link to the current Hartke cabinet:
http://www.samsontech.com/products/productpage.cfm?prodID=34#servsupport